If you’re looking at the Aspire Gotek Pro II Vape Kit, you might be wondering what makes it different from other Gotek devices, how its power modes work, or which replacement pods you can use with it.
The Gotek Pro II is a rechargeable, refillable pod kit with a 2500mAh built-in battery, three adjustable power modes and airflow control. It’s designed to give existing adult vapers more flexibility without making the device complicated to use.
In this guide, we’ll explain its main features, how the power settings work, which pods are compatible and what you need to know about the Aspire Gotek V2 Replacement Pods.
What Is the Aspire Gotek Pro II Vape Kit?
The Aspire Gotek Pro II is part of Aspire’s Gotek range of refillable pod systems.
Unlike devices that use prefilled cartridges, the Gotek Pro II can be used with compatible refillable pods. This means you can add your own suitable bottled e-liquid and replace the pod when its built-in coil reaches the end of its usable life.
The device measures approximately 91 × 41 × 21mm, making it compact enough for everyday carrying.
It also features a segment display, USB-C charging and adjustable airflow, giving you more control over the device’s operation.
Aspire Gotek Pro II Key Features
- 2500mAh rechargeable battery built into the device
- Three power modes: ECO, NORMAL and MAX
- Adjustable bottom airflow for different draw preferences
- 2ml refillable pod capacity for the UK version
- 0.4Ω, 0.6Ω and 0.8Ω compatible pod resistance options
- Integrated mesh coils in compatible Gotek V2 pods
- USB Type-C charging with support for up to 2A
- Segment display showing battery and power information
- MTL and RDTL vaping styles, depending on airflow and pod choice
Special offer: The Gotek Pro II kit is currently offered with 2 FREE Aspire Gotek V2 Replacement Pods at Nemo Homes.
How Long Does the 2500mAh Battery Last?
One of the main features of the Aspire Gotek Pro II is its 2500mAh built-in battery.
Battery capacity is measured in milliamp-hours (mAh). In general, a higher mAh rating means a battery can store more electrical charge, although actual battery life depends on how the device is used.
For example, using MAX mode frequently may drain the battery faster than using ECO mode. Longer or more frequent puffs can also increase power consumption.
Because the battery is built into the device, you don’t need to remove it for charging. Simply connect a suitable USB-C cable when needed.
The Gotek Pro II supports charging currents of up to 2A, depending on the charging equipment.
Understanding the Three Power Modes
Not everyone prefers the same vaping output. Some users want a lower-power setting, while others prefer a warmer draw.
The Aspire Gotek Pro II provides three preset power modes so you can adjust its performance without manually setting a wattage.
ECO Mode
ECO is the lower-power option.
It is intended to help conserve battery charge by operating at a reduced output. This can be useful when you prefer a gentler draw or want to reduce power consumption.
NORMAL Mode
NORMAL provides a middle setting between ECO and MAX.
It’s a practical starting point if you’re unsure which power mode to use, as you can then adjust the setting based on your preference and the pod installed.
MAX Mode
MAX provides a higher output than the other two settings.
Depending on the pod and e-liquid used, this may result in a warmer draw and increased vapour production.
Higher output can also use battery charge more quickly, so it’s worth considering how you prefer to use the device.
Tip: Start with a lower setting when using a new pod, then adjust according to the pod’s specifications and your preferred draw.
What Is Adjustable Airflow, and Why Does It Matter?
Airflow affects how much air passes through your vape when you inhale.
The Aspire Gotek Pro II includes an adjustable airflow control at the bottom of the device, allowing you to make the draw tighter or more open.
There are two main vaping styles supported by the kit.
Mouth-to-Lung (MTL)
With MTL vaping, you draw vapour into your mouth before inhaling it into your lungs.
This usually involves a tighter airflow setting and is often associated with higher-resistance pods.
Restricted Direct-to-Lung (RDTL)
RDTL uses a more open airflow setting.
Instead of taking the vapour into your mouth first, you inhale it more directly into your lungs, although the draw remains more restricted than a fully open DTL setup.
The Gotek Pro II lets you adjust the airflow to suit either style, depending on your chosen pod resistance.
Which Pods Work With the Aspire Gotek Pro II?
The Aspire Gotek Pro II supports compatible pods from the Aspire Gotek series, including the Aspire Gotek V2 Replacement Pods.
These pods are refillable and use integrated mesh coils.
That means the heating coil is already built into the cartridge. You don’t need to purchase or install a separate coil.
When the coil begins to wear out, you replace the complete pod rather than changing an individual coil head.
The Gotek V2 pods also have a side-filling port, allowing you to add suitable bottled e-liquid.
It’s important to check the exact pod model before purchasing, as compatibility can vary across devices and pod versions.
Aspire Gotek V2 Replacement Pods: What You Need to Know
The Aspire Gotek V2 Replacement Pods are designed for compatible Gotek devices, including the Gotek Pro II.
Each retail pack contains two refillable pods, so you have a spare available when your current cartridge needs replacing.
For the UK market, the pods have a 2ml e-liquid capacity.
Unlike prefilled pods, which arrive containing e-liquid, these refillable pods are intended to be filled with a suitable e-liquid of your choice.
What Is a Mesh Coil?
A mesh coil uses a mesh heating element rather than a conventional wire coil.
The mesh provides a heating surface that comes into contact with the e-liquid-soaked wicking material.
As with any coil, performance depends on factors such as resistance, power output, e-liquid composition and how the pod is maintained.
Because the mesh coil is integrated into the Gotek V2 pod, replacing the pod also replaces the coil.
Gotek V2 Pod Resistances Explained
The Aspire Gotek V2 pods are available in three resistance options: 0.4Ω, 0.6Ω and 0.8Ω.
Resistance is measured in ohms (Ω). Different resistance levels are designed to work with different output and draw preferences.
Here’s how the three options compare.
| Pod resistance | General characteristics | Typical draw preference |
|---|---|---|
| 0.4Ω | Lower resistance suited to higher output | More open RDTL |
| 0.6Ω | Middle resistance, balancing output and airflow | MTL or RDTL, depending on setup |
| 0.8Ω | Higher resistance, generally suited to lower output | Tighter MTL |
Which Gotek V2 Pod Should You Choose?
If you prefer a tighter draw, the 0.8Ω pod may be a suitable starting point.
For a more open draw, the 0.4Ω pod is designed for a lower-resistance setup.
The 0.6Ω pod sits between the two and may suit users who prefer a balance of draw restriction and output.
Your preferred e-liquid also matters. Always check that its VG/PG ratio and nicotine strength are suitable for your pod resistance and vaping style.
How to Refill Aspire Gotek V2 Pods
Refilling a Gotek V2 pod is straightforward once you’re familiar with the side-filling port.
- Remove the pod from the device if needed.
- Locate the side-filling port and carefully open its seal.
- Insert the e-liquid bottle nozzle into the filling opening.
- Fill the pod without exceeding its capacity.
- Close the seal securely and wipe away any excess liquid.
- If the pod is new, allow the e-liquid to soak into the coil’s wicking material before vaping.
For a new pod, waiting approximately 5–10 minutes after filling is a sensible precaution, unless the manufacturer specifies otherwise.
This helps reduce the chance of using the coil before its wick has absorbed enough e-liquid.
Avoid allowing the pod to run completely dry, as insufficient e-liquid around the heating element can contribute to a burnt taste.
When Should You Replace a Gotek V2 Pod?
Refillable pods don’t last indefinitely.
The integrated coil gradually wears out through normal use, and its lifespan can vary depending on your e-liquid, power setting and vaping habits.
Common signs that a pod may need replacing include:
- A persistent burnt or unpleasant taste
- Noticeably reduced flavour
- Reduced vapour production despite a charged battery
- Repeated leaking after checking the pod and filling seal
- A coil that no longer performs consistently
Before replacing a pod, check that it has enough e-liquid, is properly connected and has been filled correctly.
If the burnt taste continues, replacing the complete pod is generally the appropriate next step.
What's Included With the Aspire Gotek Pro II Offer?
The Aspire Gotek Pro II is available at Nemo Homes with a special offer that includes two free Aspire Gotek V2 replacement pods.
The main device features a built-in 2500mAh battery, adjustable airflow and three power modes.
The additional Gotek V2 pods provide spare refillable cartridges for compatible use.
Check the product listing for the exact pod resistance supplied with the offer and the complete retail box contents.
Frequently Asked Questions
Is the Aspire Gotek Pro II refillable?
Yes. The device works with compatible refillable Gotek pods, including Aspire Gotek V2 pods. You add suitable bottled e-liquid through the pod’s filling port.
Does the Aspire Gotek Pro II have adjustable wattage?
It uses three preset power modes — ECO, NORMAL and MAX — rather than requiring you to enter a specific wattage manually.
What battery does the Gotek Pro II use?
The device has a built-in 2500mAh rechargeable battery and supports USB Type-C charging.
Can I use 0.4Ω, 0.6Ω and 0.8Ω Gotek V2 pods?
These are the resistance options listed for the compatible Gotek V2 pod range. Check the individual pod packaging and device compatibility before use.
Are Gotek V2 pods prefilled?
No. The refillable Gotek V2 pods discussed in this guide are designed to be filled with compatible bottled e-liquid.
Can I replace the coil inside a Gotek V2 pod?
No. The mesh coil is integrated into the pod. When the coil needs replacing, you replace the complete cartridge.
What is the difference between MTL and RDTL vaping?
MTL involves drawing vapour into your mouth before inhaling, usually with tighter airflow. RDTL involves a more direct inhale with a somewhat more open draw.
Are the Gotek V2 pods available in 4.5ml?
A 4.5ml version is listed for certain international markets. The UK version has a 2ml capacity.
Final Thoughts
The Aspire Gotek Pro II Vape Kit combines a large built-in battery, adjustable airflow and three power modes in a compact refillable device.
Its compatibility with Aspire Gotek V2 Replacement Pods also means users can select different coil resistances and replace worn-out cartridges without replacing the entire kit.
If you’re considering the Gotek Pro II, the most useful things to compare are your preferred draw style, pod resistance and e-liquid compatibility.
At Nemo Homes, you can explore the Aspire Gotek Pro II and its compatible replacement pods, including the current offer with 2 free Gotek V2 pods.
Important: Vaping products containing nicotine are intended for adults aged 18 and over. Nicotine is an addictive substance. These products are not intended for non-smokers, children or use during pregnancy.